The Schneider ElectricBSH0551T11A1A is a high-performance brushless servo motor from the Lexium BSH series, part of the Lexium 32 servo drive offering . This 55mm flange size motor features a 6-pole design and is engineered for applications with high dynamic requirements, offering low rotor inertia for high acceleration capability

TheSchneider Electric BSH0402P16A2A is a high-performance brushless servo motor from the Lexium 32 series, designed for precise motion control applications . This 40mm flange size motor features a 10-pole design and delivers a continuous power of up to 398W . It is equipped with a single-turn SinCos Hiperface® feedback system providing 32,768 points/turn speed feedback resolution for accurate positioning . The motor has a keyed shaft without a holding brake and features rotatable right-angled connectors for flexible electrical installation . With an IP50 protection rating and a maximum mechanical speed of 10,000 rpm, it is engineered for seamless integration with Lexium 32 servo drives in industrial automation systems

TheSchneider Electric TM2DOCKN is an adaptor module designed for Schneider Electric's Modicon M218 logic controller systems . Its primary function is to provide compatibility and enable the connection of both TM2 and TM3 expansion I/O modules to a TM218 PLC, effectively bridging different module families . The module features a ribbon cable for connection to the controller and an expansion connector for attaching the I/O modules

The Schneider ElectricTM2ALM3LT is a mixed analog input/output expansion module from Schneider Electric's Modicon TM2 range, designed for use with Modicon M238 logic controllers . This module features 2 analog input channels specifically designed for low-level signals such as thermocouples (types J, K, T) and 3-wire Pt temperature probes, making it ideal for temperature monitoring applications . It also includes 1 analog output channel configurable for 0-10V voltage or 4-20mA current signals for precise actuator control

TheSchneider Electric BCH2LD0433CF5C is a brushless servo motor from the Lexium BCH2 series, part of Schneider Electric's Lexium 28 motion control offering . This 60mm flange motor is rated for 400W of continuous power and is designed for compact machines requiring precise motion control . It features a 20-bit single-turn absolute encoder for high-precision feedback, an IP65-rated shaft with a key and oil seal for protection in industrial environments, and an integrated holding brake . The motor is optimized for easy integration and automatic tuning when paired with Lexium 28 or Lexium 26D servo drives, providing a cost-effective and energy-efficient motion solution

TheSchneider Electric STBXBA2300 is a dedicated mounting base for the Modicon STB distributed I/O solution, designed specifically for the STB XBE 1200 BOS (Beginning-of-Segment) internal bus extension module . This 18.4 mm wide base provides the physical connection point for a BOS module, which must be installed in the first (leftmost) position of an extension segment . It enables the BOS module to send logic power to the I/O modules in the extension segment and supports island bus communications between those I/O modules and the NIM in the primary segment . Unlike other size 2 bases, the STBXBA2300 lacks logic and field power contacts on its left side because a BOS module mounts at the segment's start and does not require them . The base features a DIN rail locking mechanism and earth ground contacts

TheSchneider Electric STBDDO3600K is a Standard Digital Output Kit in the Modicon STB distributed I/O family from Schneider Electric. It is designed for industrial automation applications as part of a modular distributed I/O solution. The kit includes a digital output module with associated base and connectors, making it ready for installation in a distributed I/O architecture where discrete outputs from a controller (such as Modicon PLCs) need to interface with field actuators.

The Schneider Electric 490NAC0201 is a Hot Standby (HSBY) SFP socket – fiber optic single-mode adapter designed for use with Modicon M580 Hot Standby (HSBY) CPUs and redundant processor systems. It provides a high-speed communication link between primary and secondary CPUs in redundancy setups, enabling reliable synchronization and continuous operation in critical industrial automation applications.

The Schneider Electric TWDLCDA24DRF is a compact programmable logic controller (PLC) base unit from the Twido family, designed for small to medium industrial automation tasks. It combines discrete inputs and relay outputs in a single module with onboard control functions such as event processing and PID control. The unit is suitable for stand-alone applications and can support additional I/O expansion modules for larger control systems.

The Schneider Electric TSXMRPP224K is an SRAM application memory extension module designed for the Modicon Premium industrial automation platform. It provides additional volatile SRAM memory (224 kB) that expands the application memory capacity of compatible PLC processors.