The ABB DCS800‑S01‑0180‑05 is a non‑regenerative industrial DC drive designed to control DC motors by converting three‑phase AC input power into a controlled DC output. It is part of the ABB DCS800 family of digital DC drives, providing robust performance for demanding industrial environments. This type of drive offers precise speed control, adjustable current limits, and fault diagnostics, making it suitable for applications where DC motor speed and torque regulation is required. The unit operates without regenerative capability (2‑quadrant control), meaning it manages forward motor operation and braking through controlled DC output, but it does not return energy to the electrical supply during deceleration.

The ABB ACS355‑03E‑08A8‑4 is a three‑phase variable frequency drive (VFD) optimized for controlling AC motors in a wide range of machinery applications. It supports smooth speed control, energy‑efficient operation, and built‑in safety features like Safe Torque Off (STO). Its modular design makes it easy to install and set up, and it includes options for EMC filtering and communication interfaces to suit different automation needs.

AYK550-UH-038A-4+K465 VFD (also referenced as AYK550‑UH‑038A‑4+K465) is a variable frequency drive (VFD) used to control the speed and torque of AC electric motors, often in HVAC (Heating, Ventilation, and Air Conditioning) and industrial motor applications. It is designed to optimize motor performance, improve energy efficiency, and provide smooth speed control.

The ABB 1SVR703824R9300 (often listed as 1SVR730824R9300) is a three‑phase monitoring relay from ABB’s CM‑PFS.S series. It is designed to monitor the health of a three‑phase AC power supply by checking for issues such as phase sequence errors, phase failure, over‑ and under‑voltage conditions, and phase unbalance. When an abnormal condition is detected, the relay changes the state of its control outputs to signal or protect equipment. The compact relay is DIN‑rail mountable and suitable for industrial control panels and automation systems where reliable phase monitoring is required.

The ABB A145‑30‑11 is a 3‑phase AC contactor designed for industrial and commercial electrical control applications. It switches three main power poles to control motors and other heavy loads. This contactor is part of ABB’s A‑series block contactors and is suited for motor starting, distribution, bypass switching, and general load control. The control coil is designed to operate from a 220–240 V AC supply and the device combines robust construction with reliable contact performance for frequent switching.

The ABB AL16‑30‑10 DC24V is a three‑pole magnetic contactor from ABB’s AL16 series, designed for industrial and commercial electrical control applications. It is typically used to switch and control three‑phase motors and power circuits in automation, motor starter, and machinery control systems. This contactor features a 24 V DC control coil, allowing it to be driven directly from DC control logic or PLC outputs. It includes one auxiliary contact for control signaling and is built to meet IEC performance standards for reliable switching under load.

The ABB GS201 AC‑C16/0.03 is a residual current circuit breaker with overcurrent protection (RCBO). It combines the functions of a miniature circuit breaker (MCB) and a residual current device (RCD) in one unit for enhanced electrical safety. This device protects electrical circuits against overloads, short circuits, and earth leakage faults, making it suitable for residential, commercial, and light industrial distribution applications. The AC‑type residual current detection provides reliable protection against AC leakage currents.

The ABB AX115‑30‑11‑80 is a 3‑pole industrial contactor designed for controlling and switching three‑phase electrical power circuits, especially in motor control and automation applications. It features three main normally open contacts and integrated auxiliary contacts for control signaling. The contactor is AC‑operated with a standard control coil voltage suitable for use in control panels and motor starter circuits. It is built to meet industrial low‑voltage switching standards with robust electrical and mechanical performance.

The ABB TAE75‑30‑00 is a 3‑pole DC‑coil contactor designed for use in industrial power control and motor control applications. It switches three main power poles and is intended for three‑phase load circuits up to low‑medium voltage. The contactor uses a DC control coil rated for 77–143 V DC and is suitable for controlling motors, power circuits, lighting, capacitor banks, and other loads where DC actuation is required. It features a robust block‑type design with terminals suitable for panel mounting.

The ABB AF52‑30‑00‑13 is a 3‑pole industrial contactor designed for switching and controlling three‑phase motors and power circuits. It is part of ABB’s AF series of IEC contactors and features a wide‑range AC/DC electronic coil, making it suitable for use with either AC or DC control voltages. This contactor offers reliable performance in motor control, automation, and industrial electrical applications, with rugged construction and wide operational tolerances.