Technical Parameters (EC10-3624BTA) Model: EC10-3624BTA Series: EC10 Compact PLC Product Type: Programmable Logic Controller (CPU + Integrated I/O) Power Supply: Likely 24V DC (typical for industrial PLCs) Program Memory: Typically 16K steps to 32K steps (depending on configuration) Data Memory: Data memory for typical applications Processing Speed: Fast scan time for real-time control (<0.5μs per basic instruction) Digital Inputs: 36 points Input Type: Sink/Source (typically 24V DC) Isolation: Opto-isolated Response Time: Programmable filter settings (0-20ms) Input Impedance: Approximately 4.7kΩ Groups: Typically isolated in groups of 8 Digital Outputs: 24 points - Transistor type (indicated by "BTA") Output Type: Transistor (NPN sinking or PNP sourcing - check variant) Output Voltage: Typically 24V DC Output Current: Typically 0.5A per point Maximum Load: Resistive load or inductive with flyback diode Response Time: <0.1ms (for high-speed applications) Protection: Short circuit protection and over-temperature protection Electrical Life: Unlimited (solid-state) Isolation: Opto-isolated from internal circuits Common Groups: Typically grouped in commons of 8 or 12 High-Speed Counters: Typically 2-4 channels (up to 50kHz-100kHz) Pulse Outputs: Up to 2 axes (for stepper/servo control) at up to 100kHz Modes: Pulse/direction, CW/CCW PWM Outputs: Possible for proportional control Communication Ports: 1 x Programming port (RS232) - for connection to PC/programming software 1 x Communication port (RS485) for MODBUS RTU networking (master/slave) Possibly Ethernet option depending on variant Real-Time Clock: Built-in with battery backup (super capacitor or lithium battery) Programming Software: Emerson/EC series programming software (ladder logic, ST, FBD) Protocols Supported: MODBUS RTU (master/slave), proprietary protocols Networking: Can act as MODBUS master or slave Expansion Capability: Supports up to 7-8 expansion modules (I/O, analog, temperature, etc.) Maximum I/O: Up to 256 points with expansion Analog I/O Support: Via expansion modules (0-10V, 4-20mA) Temperature Modules: Support for thermocouple and RTD inputs via expansion Removable Terminals: Pluggable terminal blocks for easy wiring and replacement Protection Class: IP20 (requires enclosure for installation) Operating Temperature: 0°C to +55°C Storage Temperature: -20°C to +70°C Humidity: 5% to 95% RH (non-condensing) Altitude: Up to 2000m operating Vibration Resistance: Compliant with IEC 61131-2 standards Dimensions (H x W x D): Approx. 100 mm x 180 mm x 80 mm (3.9" x 7.1" x 3.1") - typical for higher I/O count compact PLC Weight: Approx. 0.8 kg (1.8 lbs) Standards: CE, UL (pending), RoHS, IEC 61131-2