Products
Products
home
UF-LTS16-1P

The Emerson UF-LTS16-1P is a single-phase automatic load transfer switch (static ATS) designed for use in critical power systems with redundant AC power inputs. It monitors two AC sources and automatically transfers the load from the preferred source to the alternate source when the primary power fails or goes out of specified limits, ensuring uninterrupted power to sensitive equipment. It is commonly used with UPS systems, PDUs, telecom and data center infrastructure.

open
TEL:+86 13600179521
Mail:info@hongkongeasy.com
info@hongkongeasy.com
WhatsApp
Parameters
Request a Quote
Return to List
Key Technical Parameters Electrical Rated Voltage: 220 V / 230 V AC (single-phase) Rated Frequency: 50 Hz / 60 Hz Rated Output Current: 16 A Operating Range: 150 V – 300 V AC (typical wide AC range supported) Power Factor: Typically 0.75–1.0 leading/lagging Overload Capability: ~125 % for 30 min Maximum Peak Current: Some listings note a max current threshold (~32 A) for short periods Transfer Performance Number of Poles: 2 poles (electronic switch arrangement) Automatic Transfer Time: Typically <6 ms (typical), <11 ms (maximum) Manual Transfer: Supported via front-panel transfer control (depending on model and local controls) Environmental & Operating Conditions Operating Temperature: 0 °C to +40 °C Storage Temperature: -40 °C to +70 °C Humidity Range: 5 %–95 % RH, non-condensing Altitude Capability: Up to ~3000 m above sea level without derating Mechanical Dimensions: Approx. 44 mm × 430 mm × 250 mm (standard 10 A/16 A size version) Weight: ~4.5 kg – 5 kg depending on configuration and accessories Mounting: Rack or panel mount compatible within redundant power distribution systems Functional Highlights Automatic Redundant Power Switching: Seamlessly switches load to alternate power if primary source fails Fast Transfer Speed: Minimal interruption to load with static switching technology Digital Control: DSP-based detection for power loss and fault conditions in dual-bus systems Compact Design: Industry standard size for integration with UPS and PDU systems