Key Parameters & Specifications Model Series: Mobrey Magnetic Level Gauge (MHE Enhanced Series) Type: Magnetic Level Indicator Model Designation: MHE-455 (Specific size and configuration) MHE: Mobrey Gauge Enhanced 4: Likely 4-inch (DN100) chamber diameter 55: Likely 55-inch (1397mm) or 5500mm visible length Configuration: CONSULT (Application-engineered / Custom configuration) Build Code: 0000 (Base configuration requiring specific project details) Operating Principle: Magnetic coupling - float with internal magnets drives external indicator flags or followers Chamber Material: Typically 316/316L Stainless Steel or Carbon Steel (consult specific project data) Float Material: 316/316L Stainless Steel or Titanium (application dependent) Pressure Rating: Up to 3000 psi (206 bar) depending on specific configuration Temperature Range: -320°F to 1000°F (-196°C to 538°C) depending on materials Connection Type: Flanged or threaded (per project specifications) Indicator Type: Enhanced visibility flag indicator with high-contrast colors MHE-455 Design Specifications Component Typical Specification Chamber Diameter 4 inches (DN100) Visible Length 55 inches (1397 mm) or 5500 mm Center-to-Center Distance Application-specific Process Connections Flanged (ANSI, DIN, JIS) per project Drain/Vent Standard or custom locations Enhanced Series Features (MHE) Improved Visibility: Enhanced flag design for better readability from distance Higher Temperature Rating: Improved materials for extended temperature range Corrosion Resistance: Enhanced material options for aggressive environments Modular Design: Easier maintenance and component replacement Improved Sealing: Better protection against environmental conditions Wider Material Options: Extended selection of wetted materials Key Features Custom Engineering: "CONS-0000" indicates application-specific design for unique requirements Extended Length: 455 configuration provides long measurement range for tall vessels Enhanced Visibility: Improved flag design for better readability Direct Visual Indication: No power required for basic level indication Magnetic Coupling: No mechanical connection between process fluid and indicator High Pressure/Temperature Capability: Suitable for demanding process conditions Wide Material Selection: Materials selected based on process compatibility Typical Applications Large Storage Tanks: Atmospheric and pressurized storage Process Vessels: Reactors, separators, and columns Hydrocarbon Processing: Refinery and petrochemical level measurement Chemical Processing: Aggressive chemical storage and reaction vessels Power Generation: Boiler drums and feedwater heaters Oil and Gas: Separators, scrubbers, and storage tanks Options Available Option Type Description Level Switches Magnetic or reed switch for alarms Transmitters 4-20 mA output with HART® Thermal Trace Electric or steam tracing Insulation Jacketed chambers for temperature maintenance Coatings Special internal/external coatings Materials Exotic alloys (Hastelloy, Monel, Titanium) Illumination LED or ambient light enhancement Specifications Details (Typical for MHE Series) Parameter Typical Value Chamber Material 316/316L SS, Carbon Steel, Alloy, Duplex Float Material 316L SS, Titanium, Hastelloy, Monel Float Density 0.35 to 0.95 g/cm³ (application-specific) Pressure Rating Up to ANSI Class 2500 Temperature Range -320°F to 1000°F (-196°C to 538°C) Indicator Type Enhanced magnetic flags Indicator Color Red/White or Yellow/Black (high contrast) Indicator Length Full visible length or segmented Accuracy ±0.25 inches (±6 mm) typical Enclosure Rating NEMA 4X / IP66