Technical Specifications (Parameters) Parameter Specification Product Type Soft starter Product Range Altistart 48 Device Connection In the motor supply line (inline) Product Application Heavy duty industry and pumps Utilisation Category AC-53A Supply Voltage (Ue) 208...690 V AC - 15...10 % Supply Frequency 50...60 Hz - 5...5 % Control Voltage (Us) 110...230 V AC Rated Current (Ie) 62 A Motor Power (kW) Standard application: 45 kW at 690 V Severe application: 37 kW at 690 V Standard application: 30 kW at 400 V Severe application: 22 kW at 400 V Motor Power (hp) Standard application: 50 hp at 575 V Severe application: 40 hp at 575 V Standard application: 40 hp at 460 V Severe application: 30 hp at 460 V Protection Type Phase failure, motor thermal protection, starter thermal protection Communication Port Protocol Modbus Physical Interface RS485 multidrop with 1 RJ45 connector Transmission Rate 4800, 9600 or 19200 bps Discrete Input Number 5 (4 logic, 1 PTC) Discrete Output Type 3 relay outputs (fault, end of starting, motor powered), 2 logic outputs Analogue Output Type 0-20 mA or 4-20 mA configurable Degree of Protection (IP) IP20 Dimensions (W x H x D) 190 mm x 290 mm x 235 mm Net Weight 8.3 kg Ambient Air Temperature for Operation -10…40 °C (without derating) 40…60 °C (with current derating of 2% per °C) Ambient Air Temperature for Storage -25…70 °C Operating Altitude <= 1000 m without derating > 1000...2000 m with current derating of 2.2% per additional 100 m Standards EN/IEC 60947-4-2 Product Certifications CE, UL, CSA, DNV, CCC, GOST, C-Tick, NOM 117, SEPRO, TCF Country of Origin Morocco or Indonesia (varies by source) Sustainable Status Green Premium product