Parameter Specification Brand & Range Schneider Electric - STABILINE AVC Product Type Electronic Automatic Voltage Conditioner / Dynamic Voltage Corrector (DVC) Topology Multi-tap transformer with IGBT switching technology Phase Single-Phase (1 Phase + Neutral) Rated Power 20 kVA Input Voltage Range -40% to +20% of nominal voltage (e.g., for 230V nominal: ~138V to 276V). Exact range may vary, consult datasheet. Output Voltage Regulation ±1% (of the set nominal voltage) Nominal Voltage Typically 230V AC (User configurable within a range, e.g., 200-240V) Input Frequency Range 50/60 Hz ± 5% Output Frequency Same as input frequency Output Waveform Pure Sine Wave Correction Speed ≤ 20 ms (typical, for step changes in input voltage) Efficiency Typically > 97% at full load and nominal voltage Overload Capacity 150% for 1 minute Protection Features Input over/under voltage lockout, output short-circuit, overload, over-temperature, bypass capability. Communication & Monitoring Optional communication cards (e.g., Modbus, Ethernet) may be available for remote monitoring of status, voltage, current, etc. (Refer to options list). Cooling Forced air cooling with temperature-controlled fans Operating Modes Normal (Correction), Bypass (Input directly to output), Sleep (Eco mode) Display Front-panel LCD or LED display showing input/output voltage, current, status, and alarms. Enclosure Floor-standing or wall-mountable metal enclosure (IP rating varies, e.g., IP21 for indoor use). Connection Terminal blocks for cable entry (Input, Output, Bypass). Ambient Temperature 0°C to +40°C (for full rating) Relative Humidity 0% to 95% (non-condensing) Altitude Up to 1000m without derating Standards & Certifications CE marked, compliant with IEC 62040-3, IEC 61000, UL, cUL (check specific certifications). Dimensions (H x W x D) & Weight Varies significantly. Approx. dimensions: ~700 x 400 x 500 mm. Weight: ~80-100 kg. Must consult exact datasheet.