Products
Products
ABB Allen-Bradley ADEPT ALSTOM
All Categories
AMAT B&R BACHMANN BENTLY Bosch Rexroth BAILEY CUTLER-HAMMER DEIF DANAHER Enterasys Extreme EATON ELAU EMERSON EPRO FANUC FOXBORO GE HIMA Honey Well ICSTriplex IFM Kollmorgen SIEMENS Schneider WOODWARD YASKAWA Omron YOKOGAWA MOOG MOTOROLA NI RELIANCE Rexroth SEW TRICONEX Schenider Weidmueller Mitsubishi SICK FISHER
home
LUCAX6BL

The Schneider Electric LUCAX6BL series is a line of compact, single-phase switched-mode power supplies (SMPS) from the LUCA automation component family. Designed for industrial control panels, these units provide a reliable and regulated 24V DC power source for automation devices such as PLCs, relays, sensors, and small controllers.

open
TEL：+86 13600179521
Mail：info@hongkongeasy.com
info@hongkongeasy.com
WhatsApp
Parameters
Request a Quote
Return to List
Parameter Specification Product Family Automation / Drive Components (LUCA Compact Power Supply Series) Device Type Switched-Mode Power Supply (SMPS) with Plug-in Terminals Series Reference LUCAX6BL (where X denotes a specific digit or code for power rating) Possible Power Ratings Interpretation based on common patterns: • If X=3, could be 30W (e.g., LUCA36BL). • If X=6, could be 60W (e.g., LUCA66BL). • Other values are possible. Must verify with official datasheet. Output Voltage 24 V DC (regulated) Input Voltage Range 85 - 264 V AC (47 - 63 Hz) — Universal input. Efficiency Typically > 85% (for mid-to-high power models). Regulation (Line/Load) Typically ±1% Ripple & Noise Standard industrial level. For low-noise requirements, consider the "FU" (Filtered) variant. Inrush Current Limiting Yes. Protection Features Short-circuit, overload, and overvoltage protection (automatic recovery). Isolation Reinforced isolation (IEC/EN 61558). Cooling Natural convection (fanless for lower power; may have fan for higher power, e.g., 60W+). Connection Pluggable spring-cage terminal blocks (characteristic of "BL" suffix). Indicators Green LED for output status. Operating Temperature -20°C to +60°C (with derating). Storage Temperature -40°C to +85°C. Relative Humidity 10% to 95% (non-condensing). Safety Standards IEC/EN 61558, UL 508, CSA C22.2 No. 107.1. EMC Standards EN 55011/EN 55022 (Class B), EN 61000-4 series. Protection Class IP20. Mounting DIN-rail (35 mm). Dimensions Width scales with power rating. A 60W model would be wider than a 32W model.