Specifications Parameter Category Details Manufacturer & Series Schneider Electric, Lexium 23 Complete Model Number LXM23DU30M3X Device Type Compact "Combi" Servo Drive (with integrated power supply and keypad) Input Power Single-phase, 200 - 240 V AC (±10%), 50/60 Hz Rated Continuous Output Current 3.0 A RMS Peak Output Current 9.0 A RMS (for 1 second) Control Technology Digital servo control (current, speed, position). Integrated Positioning (PTP) Yes (indicated by X). Allows storage and execution of simple motion sequences (position, speed, acceleration) directly in the drive without a full motion controller. Feedback Interface Supports standard digital incremental encoders (typical for Lexium 23 motors). Command Interface • Pulse Train Input (Step/Direction): For direct connection to PLC high-speed outputs. • Analog Input (±10V): For speed/torque control. • Digital I/O: For control signals (Enable, Fault, etc.) • Integrated RS-485 (Modbus) for parameter setting and simple control. Integrated Keypad/Display Yes (as indicated by M3). Graphic display for commissioning, monitoring, and jogging. Control Modes • Position Mode (via pulse train or internal PTP) • Speed Mode • Torque Mode I/O Connections • Digital Inputs: Typically 5-6 (24V, programmable) • Digital Outputs: Typically 2-3 (24V, programmable) • Analog Input: 1 (±10V) Regenerative Braking Requires an external braking resistor for dynamic braking (connector provided). Protection Features Overcurrent, overload, overvoltage, undervoltage, short-circuit, ground fault, motor/drive overheating. Enclosure / Cooling IP20 (for cabinet mounting). Compact, slim design. Cooling via natural convection or internal fan depending on load. Configuration Software SoMove (Free software for setup, tuning, and diagnostics). Can also be configured via the keypad. Operating Temperature 0°C to +55°C (with derating above 45°C). Storage Temperature -25°C to +85°C Mounting DIN rail (35mm) or panel mounting. Typical Applications Rotary indexing tables, small pick-and-place units, linear actuators, labeling machines, small packaging machines, and any application requiring precise positioning with a compact, cost-effective servo solution powered from single-phase mains.